Today: February 24, 2018, 3:20 am

Introducing the Midspan Bridge from Borer for Intelligent PoE Access Control

The Midspan Bridge uses Power over Ethernet technology to power equipment over a CAT5e/6 structured cable system for Access Control. 2014-11-28 11:58:17
The Midspan Bridge can support up to eight complete access control doors consisting of IN and OUT readers, two electric strikes/magnetic locks and door sensors. These can be reliably powered without the need for local mains power supply and power outlet at each door. Each of the 8 channels can deliver 13.5 Watts of power over a distance of 300m over CAT5e/6 cable.

The Midspan Bridge acts as a link between the user’s Local Area Network (LAN) and the Controller Area Network (CAN), the network that hosts door controllers, alarm input and output panels, etc. This allows organisations to use their existing structured cable infrastructure to support security and access control applications.

The Midspan Bridge includes a power management chipset that supports IEEE 802.3af and 802.3at standards. This provides protection against short circuits, polarity reversals and the accidental connection of non-compliant equipment.

Safe Power Delivery, the power delivery down CAT5e/6 cable is current limited with over/under voltage protection. This protects the CAT5e/6 cables against excessive power demands which may cause them to overheat.

The Midspan Bridge has control of the power delivery mechanism providing each circuit with a current limited output and short/open circuit protection. Sophisticated power status reporting assists in the remote diagnosis of equipment faults and their swift rectification.

This significantly reduces the need for remedial maintenance visits and engineering time on site. For instance, from a workstation the administrator can issue a command to the Midspan Bridge requesting a power reset of a particular device, which is often all that is required to resolve a problem.

Secure LAN Connection, the Midspan Bridge provides a private network permitting only registered devices to connect to it. This makes it impossible for anyone to hack into the LAN via a CAT5e/6 cable plugged into any of the Midspan Bridge's network ports.

BORER design and manufacture market-leading access control, attendance management and alarm monitoring hardware and software. The company consistently strive to innovate within the market sector in which they operate. BORER has committed to a 'Clean Design' policy which ensures that its products are highly energy-efficient; have low environmental impact during manufacture, and consume the minimum amount of materials. For more information on BORER, please visit

Press Information
Borer Ltd
Crown House, Toutley Road, Wokingham, RG41 1QN, UK.

Jan-Fei Li
Marketing Consultant

# 399 Words
Related Articles
More From Industries
TANAKA to Exhibit at FC EXPO 2018
TOKYO, Feb 21, 2018 - (ACN Newswire) - Tanaka Holdings Co., Ltd. (Head office: Chiyoda-ku, Tokyo; Representative Director & [..]
Safe and Secure Self Storage Announces 1000 [..]
Safe & Secure a well known self storage company announced today that they're bringing another 1000 Units online by the [..]
Safe and Secure Self Storage Expands its [..]
Safe and Secure Self Storage based out of Garfield, New Jersey, has just brought another 1000 Units online. Their facility [..]
Dump-Squad named one of the fastest growing [..]
(EMAILWIRE.COM, February 19, 2018 ) Toronto, ONT -- As one of the 5 largest cities in North America, Toronto has [..]
Tarps Limit Damage to Homes Following Natural [..]
Stevensville, MI, February 13, 2018 – Riding out a severe storm, hurricane or tornado is bad enough, but what about [..]

Disclaimer: If you have any questions regarding information in this press release please contact the company added in the press release. Please do not contact pr-inside. We will not be able to assist you. PR-inside disclaims the content included in this release.