Today: June 21, 2018, 8:26 am

Electroplating Engineers of Japan Develops Innovative Direct Patterning Plating Technology

Electroplating Engineers of Japan Develops Innovative Direct Patterning Plating Technology 2017-05-31 05:39:50
TOKYO - (ACN Newswire) - Tanaka Holdings Co., Ltd. (head office: Chiyoda-ku, Tokyo; Representative Director & CEO: Akira Tanae) announced today that Electroplating Engineers of Japan, Ltd. (EEJA; plant and office: Hiratsuka City, Kanagawa Prefecture; Representative Director & CEO Muneharu Nakanouchi) used surface treatment chemicals (photosensitive primer used with a colloid catalyst) that it developed to create a new direct patterning plating technology. This technology does not require a vacuum environment or photoresist, and can directly form low-resistance fine wires on a variety of materials using a low-temperature process that can be performed at or below 100 degrees Celsius.

The new technology is a plating technique whereby a photosensitive primer is applied to various substrates such as PET film or glass and exposed to light; after the substrate is immersed in a colloid catalyst solution that includes a gold nanoparticle catalyst. The catalyst is immersed in a electroless plating solution with whatever metal that has been selected for the specific application to form fine electronic circuitry patterns made of various metals with a wire width of 5 um (a micrometer is one-millionth of a meter). Recently, metallic inks have been a focus of attention as a next-generation metal wire formation technology, but this new technology is able to create low-resistance wires using a lower temperature process compared to the wire formation process used for existing metallic inks. In addition, a groundbreaking method of automatic adsorption of the gold nanoparticle catalyst by the photosensitive primer makes it possible to directly form the wires without using a photoresist. The new technology forms wires using a plating method that does not require vacuum equipment, facilitating the expansion to large batch processing, which will make it possible to form high-performance metallic wires on various substrates and enable mass production.

As a result of the characteristics and benefits of this technology, it is expected to open new areas of next generation electronics processes that could not be achieved with existing metal wire forming technologies.

Main Features of the New Technology

- Produces wires with much lower volume resistivity (Au: 3.3 uohm-cm, Cu: 2.3 uohm-cm) using a low-temperature process at or below 100 degrees Celsius

- Directly forms fine wires on a variety of non-conductive materials including PET film and glass

- Does not require a vacuum environment or photoresist

Newly-developed photosensitive primer and colloid catalyst surface treatment chemicals

When developing the new technology, EEJA independently developed a photosensitive primer and a colloid catalyst as new surface treatment chemicals.

- Photosensitive Primer

The photosensitive primer is an application-type resin solution based on organic solvents and is used to supplement the gold nanoparticle catalyst on the substrate. By exposing the photosensitive primer to ultraviolet light, the ability to supplement the gold nanoparticles are eliminated in areas other than where wires are to be formed.

- Colloid catalyst

The colloid catalyst is a water solution that includes a gold nanoparticle catalyst and is automatically absorbed onto the priming paint surface. The gold nanoparticle catalyst has high catalytic activity in various types of electroless plating solutions, and as a result, a precipitation reaction occurs in the metal from adsorption in the electroless plating solution.

Issues with existing technologies

There has been strong demand in recent years for development of vacuum-less and resist-less metal wire formation technologies exemplified by printed electronics as core technologies of next generation electronics. Furthermore, development of metallic inks has become active as a leading candidate for a next-generation wire formation technology. Research that will enable the formation of wires with lower resistance at lower temperatures is being conducted, but it has not been possible to achieve both low-temperature wire formation and low-resistance wires. EEJA developed this new technology based on the idea that a plating method that deposits metallic crystals from a water solution at under 100 degrees Celsius will make it possible to form low-resistance wires using a low-temperature process.

Benefits of the new technology

- Vacuum-less and resist-less fine-wire formation

The new technology is centered on plating techniques and forms wires from a water solution, and consequently, a vacuum environment is not needed. By using a groundbreaking method of automatic adsorption of the gold nanoparticle catalyst by the photosensitive primer, direct wire formation is possible without the use of a photoresist. Expansion for large batch processing will be easy, making it possible to form high-performance metallic wires on various substrates and enabling mass production.

- Formation of low-resistance wires is possible using a low-temperature process

This technology uses a low-temperature process at under 100 degrees Celsius to produce wires with much lower volume resistivity (Au: 3.3 uohm-cm, Cu: 2.3 uohm-cm) compared to existing metallic ink technologies. As a result, it is possible to form high-performance wires on non-conductive materials with low temperature resistance such as PET and other general-purpose plastic films.

- Adequate bonding strength on smooth substrates

Wire formation that exhibits adequate bonding strength (0.5 N/mm) even on smooth-surface PET film (Ra = 10 nm) is possible. Surface roughing of the substrate is not needed, and high adhesion is achieved.

- Light exposure that does not require nitrogen purging or ozone elimination

The wavelength of the ultraviolet radiation to which the primer is exposed is in the range of 300 nm, and therefore, it is not necessary to use the short wavelength excimer UV light (with a wavelength of 200 nm or shorter) that is used with existing pattern wire formation technologies that modify the substrate surface. This means that external utilities such as nitrogen purging and ozone elimination from the light source are not needed.

- Application to a variety of printing processes is possible

Wire formation using printing processes that employ methods such as partial printing of the colloid catalyst solution with the primer applied to the substrate surface or printing primer on the substrate and immersing in a colloid catalyst solution are possible. As a result, the technology can be applied to various wire formation techniques that combine printing methods and light exposure methods.

Examples of application and possibilities of the new technology for new-generation electronics

The new technology can form low-resistance, fine wires at low temperature, and its main applications are expected to be flexible displays, antennas, and sensors. Formation of fine wires on three-dimensional surfaces is a possibility, and consequently, application to molded interconnect devices (MID; molded resin components with integrated wiring and electrodes) may be possible. In addition, multilayer wiring formation has successfully been achieved by combining application-type insulation materials, and there are expectations that this technology will lead to innovations in metal wire formation technology.

EEJA plans to begin sample shipments of the photosensitive primer, colloid catalysts, and electroless plating solution used with this technology by end of this year.

This technology won the "JPCA Show Award" at the JPCA Show 2017 (47th Japan Electronics Packaging and Circuits Association Show), which will be held from June 7 to 9 of this year. EEJA will display this technology at its booth and will have a special panel display at 7H-29 in East Hall 5 during the show.

Press release:

Press Information

Published by
ACN Newswire
+65 6304 8926

# 1163 Words
Related Articles
More From Industries
Tarps Now® Announces Expanded Line of Mesh [..]
ST. JOSEPH, MICHIGAN, UNITED STATES -- Tarps Now® is pleased to announce the roll out of new lines of outdoor [..]
Tarps Now® Solves Industrial Problems with Industrial [..]
ST. JOSEPH, MICHIGAN, UNITED STATES –Partitioning a large plant or warehouse with Industrial Divider Curtains is an important part [..]
Tarps Now Launches New Lines of Military [..]
ST. JOSEPH, MICHIGAN, UNITED STATES –Due to increasing need for Military Grade tarps, covers and fabrics meeting the specifications of [..]
Tarps Now® Announces New Online Configurator for [..]
ST. JOSEPH, MICHIGAN, UNITED STATES, May 8, 2018 / -- Tarps Now® is pleased to announce the development and release [..]
Singapore lanyard company offers clients one-stop shopping
SINGAPORE – Lanyards are a popular tool in today’s culture, used by everyone from businesses, to schools, to sporting events [..]

Disclaimer: If you have any questions regarding information in this press release please contact the company added in the press release. Please do not contact pr-inside. We will not be able to assist you. PR-inside disclaims the content included in this release.