PR-Inside.com: 2018-03-21 06:45:22
Through their website Bright Light provides a range of independent control systems that will provide both hardwired and wireless solutions for smart management for all lighting infrastructure. Bright Light is a leading Australasian LED lighting wholesale specialist who has provided quality LED lighting solutions for the residential, commercial, hospitality, marine and architectural lighting industries since 2004.
Bright Light’s independent control systems provide total reliability for individual remote control of any luminaire type. The company uses innovative technologies to reduce energy consumption to give its customers dynamic lighting features that can enhance all indoor and outdoor design. The independent control systems can be installed easily.
The company stocks 3 channel wireless PWM receivers that provide wireless communication of PWM signal for use with Wireless PWM Dimmer Sender. Unlimited receivers can be used in conjunction with a single sender. It has a frequency of 2.4GHz ISM 64 channels. The 3 x 6A RF Remote Receiver can be used with compatible RF remotes (T1, T2, T3, and T3M). The 4 x 5A RGBW RF Remote Receiver Unlimited receivers can be used with RF remote T4.
The 4 Channel Wireless PWM Receiver is used for the wireless communication of PWM signal. One receiver is required to be used with each sender. Unlimited receivers can be used in conjunction with a single sender.
The 4-Zone RGBW Touch Controller can be controlled simultaneously or individually. It has on/off, brightness, colour wheel, speed, and 11 preset modes. For wireless control, it can be connected with BL-PC-DIM-2006, frequency of 2.4ZGHz, up to 30 metres. For hardwired DMX control, it can be connected with a 4-channel DMX decoder.
The 10 Zone RGB RF Controller can control up to 10 zones. It has two independent scenes that can be saved per zone. It has options of on/off, brightness, colour wheel, speed, and 18 preset modes. It also has a frequency of 2.4GHz, up to 30 metres.
The 12A Contact Dim Unit can control 12V or 24V single colour LED Linear Strip, it has a 10Amp maximum load and is controlled by almost any momentary contact switch. This unit can be connected to Bright Light LED repeaters to expand your lighting installation.
Bright Light also has motion sensor that senses movement in an area and trigger adjustable time delay for lighting. They can be used in pantries, hallways, stairs, closets, etc. For ribbon strips they have the 3 x 6A RGB Controller with remote for control and colour change. The 3 x 8A RGB independent Control is for RGB colour changing control. Each function can be controlled by momentary contact switch. The RGB RF Controller for RGB LED ribbon strip control has 32 preset modes. RGB Touch Controller Touch panel control is available for RGB LED ribbon strip. It has on/off, colour wheel, brightness, 11 preset modes, and saved scene key.
The technicians from Bright Light can help clients navigate through any lighting project. Bright Light can be contacted on email@example.com
or 1800 793 185.
For more information on led side lighting modules, led supplies Australia, led projector lights and more and to order online: www.brightlightled.com.au/