Free Submission Public Relations &
Deutsch English

Computer & Technology

Multi Degree of Freedom Vibration Testing Superior to Single Axis Testing in Precipitating Failures in Electronics

Print article Print article

Data Physics Multishaker vibration control. Photo courtesy of CALCE.
Data Physics Multishaker vibration control. Photo courtesy of CALCE.
2014-04-11 19:26:56 - A Data Physics Matrix multishaker controller was used at CALCE at the University of Maryland for multi degree of freedom vibration testing.

San Jose, California — A recent study at the Center for Advanced Life Cycle Engineering (CALCE) at the University of Maryland in College Park, Maryland has shown that traditional sequential single-axial testing is inadequate, expensive, time consuming and provides misleading reliability predictions in comparison to simultaneous six degree of freedom testing.

Ed Habtour, principal investigator on the project at the U.S. Army Research Laboratory at the Vehicle Technology Directorate (ARL/VTD), said that test methods developed by ARL, U.S. Army Materiel Systems Activity Analysis, Aberdeen Test Center, the University of Maryland's Center for Advanced Life Cycle Engineering (CALCE), TEAM Corporation and Data Physics Corporation were conducted using the TEAM Tensor 900 six degrees of freedom (6-DoF) shaker, one of only three of

its kind in the world. The objective is to develop high fidelity physics of failure (PoF) based reliability models. Habtour went on to say that discoveries from this breakthrough study could lead to changes in the way industry conducts vibration testing for cars, trucks and aircraft.

The project receives support from the industry-government consortium which sponsors this research at CALCE. “The consortium consists of leading electronics manufacturers and users from both military and commercial arenas,” explained Dr. Abhijit Dasgupta, professor at the University of Maryland's CALCE.

Military electronic equipment must operate in harsh environments and military standards provide the guidance for vibration testing. Vibration testing is typically performed using sequential single axis tests in each of 3 orthogonal axes. The most recent revision of the military standard, Mil-Std-810G, for the first time, includes methods for simultaneous multi degree of freedom testing.

"One of the key challenges in re-creating life-cycle vibration conditions in the lab is the re-creation of simultaneous multi-axial excitation that components experience in the field, as seen in various complex dynamic loads, including shock and vibration," described Habtour.

The Data Physics Matrix multishaker controller was used in this study to produce six degrees of freedom vibration - three translational and three rotational motions simultaneously. The Matrix controller offers a wide range of multi-degree of freedom vibration and shock testing capabilities including, random, sine, classical shock, shock response spectra, mixed mode (sine on random, random on random) and time waveform replication control.

US Army press release: ..

Data Physics Multishaker vibration control: ..

Press Information:
Data Physics Corporation

Data Physics Corporation
1741 Technology Drive
Suite 260
San Jose, CA 95110

Contact Person:
Bourke MacDonald
Marketing Communications Specialist
Phone: 1-408-437-0100
email: email


Disclaimer: If you have any questions regarding information in these press releases please contact the company added in the press release. Please do not contact pr-inside. We will not be able to assist you. PR-inside disclaims contents contained in this release.
Latest News
Read the Latest News


Terms & Conditions | Privacy | About us | Contact