2014-01-31 10:01:05 - The INTERFACE-TERMINAL range of enclosures was specially developed for the installation of large-volume operating elements, graphics displays and touch screens with diagonals of 6.4“/8.4“ and 10.4“. Depending on requirements, the range of enclosures can be used either vertically or horizontally. Besides the existing application options – as a mobile and/or desktop version, wall-mounted by means of a flat or inclined station – standard commercial iPads can now also be installed in the INTERFACE-TERMINAL.
Here, the front panel of size L now has a suitable cutout for the installation of the iPads 2, 3, 4 and for the latest version iPad Air. The iPad mini fits neatly into the smaller enclosure version M. For installation, the tablet is simply „clamped“ between the two enclosure shells. The INTERFACE-TERMINAL can now also be fully integrated in the wall or in front panels; installation in plant and machinery is also conceivable. This is made possible by a installation assembly kit with a fine design cover in the standard colour off-white (RAL 9002). The installation of the assembly kit is very easy and rational: mount the appropriate holder (supplied) on the fully assembled enclosure. Then set the complete
unit in the cutout and align it correctly. Mark and drill mounting holes. Then connect the device to the cables, fix in place from the front using the holders and simply push on the design cover – that is all. This also has visual advantages, because the screw connections are not visible, but always remain accessible for subsequent maintenance or installation work.